Aggiornamento 2018 versione inglese

167 CUTTING TOOLS Detergent for tanks Performa CL+ Detergent for machine tool sumps before replacement of the cutting fluids Applications Performa CL+ was designed to favour the washing operations and sanitize the machine tool sumps and circuits, allowing the microbiological residual load to be reduced to a minimum. It is free of formaldehyde donors. Recommended concentrations: Lightly polluted emulsions: 1.5% Heavily polluted emulsions: 3.0% N.B.: values expressed in volumetric percentage Pour Performa CL+ directly into the emulsion, at least 8 hours before emptying the tank. Composition - Glycol ethers - Organic salts - Anionic surfactants Chemical-physical characteristics Appearance: Liquid Odour: Odourless pH of solution at 10%: 11.8 + 0.1 Density at 20°C: 1.068 ± 0.005 Solubility in water: Soluble Performa CL+ is available in 5kg. and 30 kg drums. U01610 € Litres U016100005 -,-- 5 U016100030 -,-- 30 U01610 € Litres Defoamer silicone Performa NF+ Silicone defoamer specific for emulsions and alkaline systems Application Performa NF+ is specific in the mechanical and electromechanical industry for the treatment of emulsions and alkaline solutions or as releasing and gliding agent. Thanks to its special composition (silicone in aqueous solution), Performa NF+ is finely dispersed in aqueous solutions, interfering in the formation of foam and reducing it drastically and for a long period. The use of the product does not condition the chemical-physical stability of the emulsion and of alkaline solutions. Its characteristics are those of reducing foam in cutting fluids and alkaline solutions and to create a very thin anti-adhesive and gliding film over any kind of surface. - Use as DEFOAMER: dilute with water in variable concentrations from 0.5% to 4% according to the amount of foam to be dealt with. Spray the solution over the foam to combat or add to the liquids to avoid formation. - Use as GLIDER or SEPARATION AGENT: dilute 20-30% with water, the spray over the surfaces to be treated. Composition - Dimethyl polysiloxane - Emulsifiers Chemical-physical characteristics Appearance: Liquid Colour: Milky white Odour: Practically odourless pH as is at 20°C: 6.2 + 0.1 Density at 20°C: 1.004 ± 0.005 Solubility in water at 20ºC: Total Performa NF+ is available in 5kg. and 30 kg drums. U01620 € Litres U016200005 -,-- 5 U016200030 -,-- 30 U01620 € Litres Prepares the water and inhibitor for non-ferrous materials Performa HW+ Prepares the water and inhibitor for non-ferrous materials ] Application Performa HW+ is a specific formulation to fight the hardness of the water neutralizing the destabilizing effect of calcium salts present in hard water; protects specially reactive non-ferrous metals (galvanized materials, brass, etc.) from staining. Dissolves the soaps that are created in emulsions prepared with hard water and contaminated with polluting oils Recommended concentrations: - in water: 0.1 - 0.3% before preparation of the emulsion - in the working emulsion: 0.1 - 0.2% N.B.: Values expressed in volumetric percentage Composition - Semi-synthetic mixture of sequestering agents and additives Chemical-physical characteristics Appearance: Liquid Colour: Dark amber Odour: Characteristic pH at 1% in water: Approx. 9.0 Density at 20 °C: ~ 1.17 Kg/dm3 Performa HW+ is available in 5kg drums. U01630 € Litres U016300005 -,-- 5 Shipment from CDU warehouse Shipping from external warehouse