Aggiornamento 2018 versione inglese

168 Algicide-Microbicide-Fungicide soluble in emulsions Performa NS+ Algicide - Microbicide - Fungicide soluble in solutions Application Performa NS+ is a specific formulation, soluble in water, for decontamination of emulsions and degraded waters and to prevent their pollution by bacterial micro-flora and moulds. The washing and sanitation operations, that allow the residual microbiological load to be reduced to a minimum, can be performed without interrupting the production cycle. Performa NS + can be used also for treatment in painting cabins. Recommended concentrations: - First treatment : 0.05 -0.% - Maintenance dosage: 0.05% N.B.: values expressed in percentage volume Composition - Stabilised aqueous solution of biocides Chemical-physical characteristics Appearance: Liquid Colour: Amber Odour: Slight pH at 20°C: Approx. 3 ± 0.5 Density at 20°C: 1,3 ± 0,5 Kg/dm3 Performa NS+ is available in 5 Kg drums U01640 € Litres U016400005 -,-- 5 Volumix Mixer D3RE10VVF The Volumix mixes stable emulsions which maintain high cutting fluid quality over time. It is installed on the water supply system and uses the water pressure as its sole motive force. It doses the required percentage of concentrated product and, mixing it with water, sends it directly to the machine. The dose is adjusted simply by aligning the adjustment rings on the graduated scale. Advantages: - Lower consumption of concentrated product - Guarantee of accurate and constant mixing - Distribution of emulsion directly to the manufacturing points without use of pumps or manual systems - Does not require electric or pneumatic energy and maintenance interventions, or prefiltring or pressure adapters Technical characteristics: The Volumix mixer is manufactured with high quality composite materials, compliant with the highest global technical standards: - Supplied with suction pipe in PVC - Fixing wall bracket - Water flow rate from 10 lt/h to 3 m 3 /h, pressure from 0.3 to 6 ATM, dosing from 1% to 10%. U01915 € Dosage (%) Operating water flow (l/h) Working pressure (bar) U019150005 -,-- 1-10 10-3000 0,5-6 Remoil oil separator for collection tanks Remoil oil separator for collection vat, for the separation of lubrication oils from the aqueous emulsions. Suitable for vats containing up to 2000 litres of emulsionable oil. The polyurethane belt with a width of 25 mm allows extraction of 1.5 l/h with max temperature 50° C, the best extraction is obtained at 4.5 V with approx. 6 g/min., the speed can be regulated using a potentiometer. Structure entirely in stainless steel. Advantages: - extends the duration of the cutting fluid - eliminates bad odours - avoids troublesome smoke - reduces maintenance costs - reduces disposal of exhaust oils On request it is possible to obtain Remoil with working lengths of 600 and 1,400 mm. U90705 € Execution U907050005 -,-- Oil separator with rod 200 mm U907059005 -,-- Spare belt for rod 200 mm U907059010 -,-- Spare transformer U90705 € Execution Shipment from CDU warehouse Shipping from external warehouse