Aggiornamento 2018 versione inglese

192 Collet chuck ER DIN 6499-B sealed with holes for coolant Locking clamp ER DIN 6499-B , watertight, with holes for the coolant. The vulcanization of the cut channels the coolant through the tool. Recommended maximum pressure 40 to the tool bar. Used with ring cod. C70300 standard. For higher pressures up to 120 bar is recommended to use calipers with mechanical seal coolant. Running accuracy 0.008 mm. C70085 € Type Nominal ø (mm) C700852030 -,-- ER16 3 C700852040 -,-- ER16 4 C700852050 -,-- ER16 5 C700852060 -,-- ER16 6 C700852070 -,-- ER16 7 C700853040 -,-- ER20 4 C700853050 -,-- ER20 5 C700853060 -,-- ER20 6 C700853070 -,-- ER20 7 C700853080 -,-- ER20 8 C700853090 -,-- ER20 9 C700853100 -,-- ER20 10 C700854030 -,-- ER25 3 C700854040 -,-- ER25 4 C700854050 -,-- ER25 5 C700854060 -,-- ER25 6 C700854070 -,-- ER25 7 C700854080 -,-- ER25 8 C700854090 -,-- ER25 9 C700854100 -,-- ER25 10 C700854110 -,-- ER25 11 C700854120 -,-- ER25 12 C700854130 -,-- ER25 13 C700854140 -,-- ER25 14 C700855030 -,-- ER32 3 C700855040 -,-- ER32 4 C700855050 -,-- ER32 5 C700855060 -,-- ER32 6 C700855070 -,-- ER32 7 C700855080 -,-- ER32 8 C700855090 -,-- ER32 9 C700855100 -,-- ER32 10 C700855110 -,-- ER32 11 C700855120 -,-- ER32 12 C700855130 -,-- ER32 13 C700855140 -,-- ER32 14 C700855150 -,-- ER32 15 C700855160 -,-- ER32 16 C700855170 -,-- ER32 17 C700855180 -,-- ER32 18 C700855190 -,-- ER32 19 C700855200 -,-- ER32 20 C700856040 -,-- ER40 4 C700856050 -,-- ER40 5 C700856060 -,-- ER40 6 C700856070 -,-- ER40 7 C700856080 -,-- ER40 8 C700856090 -,-- ER40 9 C700856100 -,-- ER40 10 C700856110 -,-- ER40 11 C700856120 -,-- ER40 12 C700856130 -,-- ER40 13 C700856140 -,-- ER40 14 C700856150 -,-- ER40 15 C700856160 -,-- ER40 16 C700856170 -,-- ER40 17 C700856180 -,-- ER40 18 C700856190 -,-- ER40 19 C700856200 -,-- ER40 20 C700856210 -,-- ER40 21 C700856220 -,-- ER40 22 C700856230 -,-- ER40 23 C700856240 -,-- ER40 24 C700856250 -,-- ER40 25 C70085 € Type Nominal ø (mm) Collet chuck ER DIN 6499-A for tapping Collet chuck ER DIN 6499-A with internal sliding frame for tap. Can be used in tapping without axial compensation, can be applied in CNC machines with the option of rigid tapping. Rotation precision of 0,015mm to improve the results of the work. Can be used only with locking ring nut with eccentric Item C70300. C70070 € Type Stem ø (mm) Dimension □ (mm) C700702035 -,-- ER 25 3,5 2,7 C700702040 -,-- ER 25 4 3 C700702045 -,-- ER 25 4,5 3,4 C700702050 -,-- ER 25 5 4 C700702055 -,-- ER 25 5,5 4,3 C700702060 -,-- ER 25 6 4,9 C700702070 -,-- ER 25 7 5,5 C700702080 -,-- ER 25 8 6,2 C700702090 -,-- ER 25 9 7 C700702100 -,-- ER 25 10 8 C700702110 -,-- ER 25 11 9 C700702120 -,-- ER 25 12 9 C700703035 -,-- ER 32 3,5 2,7 C700703045 -,-- ER 32 4,5 3,4 C700703050 -,-- ER 32 5 4 C700703055 -,-- ER 32 5,5 4,3 C700703060 -,-- ER 32 6 4,9 C700703070 -,-- ER 32 7 5,5 C700703080 -,-- ER 32 8 6,2 C700703090 -,-- ER 32 9 7 C700703100 -,-- ER 32 10 8 C700703110 -,-- ER 32 11 9 C700703120 -,-- ER 32 12 9 C700703140 -,-- ER 32 14 11 C700703160 -,-- ER 32 16 12 C700704060 -,-- ER 40 6 4,9 C700704070 -,-- ER 40 7 5,5 C700704080 -,-- ER 40 8 6,2 C700704090 -,-- ER 40 9 7 C700704100 -,-- ER 40 10 8 C700704110 -,-- ER 40 11 9 C700704120 -,-- ER 40 12 9 C700704140 -,-- ER 40 14 11 C700704160 -,-- ER 40 16 12 C700704180 -,-- ER 40 18 14,5 C700704200 -,-- ER 40 20 16 C70070 € Type Stem ø (mm) Dimension □ (mm) Shipment from CDU warehouse Shipping from external warehouse