Aggiornamento 2018 versione inglese

220 Lamellar disk in unwoven fabric Lamellar disk made of special unwoven fabric material impregnated with abrasive corundum granules. The plates are arranged individually and are applied in a special way that allows good ventilation with a constant finish level. They are fitted on corner sanders without having to use the support plate, but we recommend that the sander have a variable speed function. Features: sanding of all ferrous and non ferrous materials; stainless steel, plastic, paintwork, fibreglass. Codice L20220 ) # # Acciaio Acciaio INOX Alluminio e leghe L20220 € ø (mm) Hole ø (mm) Grain No. of strips per wheel Strips dimensions (mm) Max revolutions no. (rev/min) Support L202200005 -,-- 5 115 22,2 fine 28 18x25 10.500 fiberglass L202200010 -,-- 5 115 22,2 Medium 28 18x25 10.500 fiberglass L202200015 -,-- 5 115 22,2 GROSSA 30 18x25 10.500 fiberglass Pz. Mirror polishing disk Disk made up of a special circular crown glued to the support. It comprises a closed web of continuous unwoven fabric mesh filaments impregnated with evenly distributed abrasive granules. It allows mirror polishing of metals and non-metals, previously machined using abrasive disks. While it is a finishing product it retains a slight ability to remove material, so as to eliminate small imperfections and areas of roughness left by previous machining operations. The noise level is very limited, it does not leave pollutants and is therefore indicated for special operations subject to strict controls. Recommended for use on stainless steel, iron, brass, aluminium, bronze, plastic resins, marble, glass, on all surfaces where an excellent finish is to be provided. L20240 € ø (mm) Hole ø (mm) Grain Suggested no. of revolutions (rev/min) Support L202400005 -,-- 10 115 22,2 fine 8.300 fiberglass L202400010 -,-- 10 115 22,2 Medium 8.300 fiberglass L202400015 -,-- 10 115 22,2 GROSSA 8.300 fiberglass Pz. Flap disc in felt Single-plate disk in felt, 95% cotton, glass fiber support. Suitable for pre-polishing, polishing and mirror polishing, with the possibility of using polishing paste (code L40090). Work surfaces : stainless steel, common steels, aluminum and its alloys. L20265 € ø (mm) Hole ø (mm) Suggested no. of revolutions (rev/ min) Max revolutions no. (rev/min) L202650005 -,-- 20 115 22,2 5.000 13.300 Pz. Codice L20265 F # # Acciaio Acciaio INOX Alluminio e leghe Zirconium oxide lamellar mini disk Lamellar disk with zirconium oxide abrasive plates arranged individually and at a special angle, thus equalling the flexibility features only found to date using fibre disks. Features : cold cutting, excellent finish, no blocking. Particularly suitable for the machining of stainless steel; also used for generic work such as quick removal of rust, paints, etc.. Screw connection compatible with other systems present on the market. Codice L20210 ) # Acciaio Acciaio INOX L20210 € ø (mm) Grain Max revolutions no. (rev/min) No. of strips per wheel Strips dimensions (mm) Support L202100005 -,-- 20 50 40 22.000 27 12x15 nylon with threaded pin L202100010 -,-- 20 50 60 22.000 30 12x15 nylon with threaded pin L202100015 -,-- 20 50 80 22.000 30 12x15 nylon with threaded pin L202100020 -,-- 20 50 120 22.000 30 12x15 nylon with threaded pin Pz. # Recommended F Suitable ) Possible Shipping from CDU warehouse Shipping from external warehouse