Aggiornamento 2018 versione inglese

292 Shipment from CDU warehouse Shipping from external warehouse Universal cutting fluid ER-F680 for high performance Product made with materials of vegetable origin additivated with ER (additive for high pressures). Does not contain : mineral oils, toxic solvents, chlorofluorocarbons (CFCs); non-flammable. Green, environmentally friendly product that provides exceptional performance in tapping, drilling, milling and cutting of common steel, stainless steel, titanium, aluminum and its alloys and all metals difficult to machine (Cutting & Tapping ). - Does not drip , extreme adhesion, cools, lubricates and protects the tool contact interface, increasing the tool lifecycle by up to 10 times . U10025 € Package U100250004 -,-- 12 Spray 400 ml U100250010 -,-- 1 1 l U100250050 -,-- 1 5 l Pz. Leak seeker Leak Test A390 Product for detecting leaks of gas or compressed air in pipes, pressure tanks and cylinders. Once applied, in case of leakage the product creates foamy bubbles. - Appearance : transparent liquid. U05030 € Package U050300004 -,-- 12 Spray 400 ml Pz. Multidirectional dispenser Two-way multi-directional dispender to be mounted on Tkn Chem spray. It can be used on the following products: U050050004 / U050100004 / U050150004 / U050300004 / U100050004 / U100100004 / U100150004 / U150050004 / U150100004 / U250250004 / U250300005 / U150200004. U05100 € U051000005 -,-- Hyperactive detergent Idrovap H110 Prestazioni The nature of the dirt that deposits, even very encrusted, over surfaces exposed to the atmospheric agents, for a long period, can be very varied and also change considerably from one area to another. It is therefore necessary to intervene with a "smart" product whose formulation is sufficiently elastic to allow an energetic attachment on certain points and meanwhile to produce a mild action on the most delicate parts. How to use Dilute Idrovap at 10-20% with water. Aspirate the solution into the pressure washer which will proceed to further dilution, configuring it in order to have at the exit of the lance a final product concentration of 3-4%. Carry out the washing paying attention that the temperature of the solution at the exit of the lance is not lower than 70 °C and that the pressure is at least 70 atm. Finish the wash with an abundant rinse always at warm temperature. Warnings: Avoid washing in direct sunlight and do not allow the product to dry on the surface. Applications Idrovap was specifically designed for the cleaning of: - Motor vehicles chassis - Vans - Bus cabins - Tankers - Vehicles in general U25005 € Package U250050050 -,-- 5 Kg U250050200 -,-- 25 Kg U25005 € Package