Aggiornamento 2018 versione inglese

293 Shipment from CDU warehouse Shipping from external warehouse Water based solvent-detergent Solmar H130 Performance Solmar is made up of a careful mixture, in aqueous environment, of alkali plugs, washing agents and specific detergents, as well as hydrocompatible solvents that develop an intense synergistic action ensuring a perfect and fast detergent action on natural and synthetic surfaces. The very low foam allows to avoid, also, the tedious (and costly!) rinse action. Solmar also performs a slight anti-rust action over non-lubricated metallic surfaces. Solmar is not corrosive, does not emit unpleasant odour, and is economical because it can be diluted in water. Applications - Machine tools - Textile machines - Printing machines - Stamping presses - Plastic surfaces - Pavement - Aspiration caps and fans in industrial kitchens How to use Dilute Solmar at 4-10% with water complying with type of dirt and apply the solution obtained, spraying it over the surface. Wait a few seconds so the product performs his disaggregating action completely on the dirt, then run a sponge to completely remove the dirt still attached to the surface. U25010 € Package U250100050 -,-- 5 Kg U250100200 -,-- 25 Kg U250102000 -,-- 200 Kg U25010 € Package Descaler and chemical cleaner Descal H160 Performance Descal is an acid product with high concentration and especially fast in the removal of slight traces of scale, oxidation and various saline scale, very tough (for ex. cement), from any surface. Descal is carefully inhibited and therefore, if used correctly, does not damage the majority of metals. Applications Descal quickly removes oxidation from: - Boilers - water side - Serpentines - Printing presses - Pipelines - Heat exchangers - Cooling towers - Cement Mixers How to use In a plastic material container or one resistant to acids, dilute a portion of the product with 3/10 parts of water, complying with thickness of the encrustation. The solution thus obtained can be put in contact with the surface to be treated (or applied in a circle) leaving it to act until it stops making gas bubbles (harmless carbon dioxide). Should it be necessary to treat small pieces, the most adequate treatment is immersion for the required time. As a guideline we indicate that to dissolve 1 Kg of scale approximately 2 Kg of Descal is required. U25015 € Package U250150050 -,-- 5 Kg U250150200 -,-- 25 Kg U25015 € Package Detergent cleaner Puliclean P270 Product with a formula developed on a solvent base , for optimally cleaning very dirty parts from oils and fats , dries quickly, leaves no residue, does not damage the paint. It can be used in all sectors for cleaning parts during maintenance and replacement operations. It can be used pure by immersion, paint brush or spray; best results when used in semi-automatic washing machines and ultrasonic cleaners. - Appearance : transparent liquid. U25030 € Package U250300005 -,-- 12 Spray 400 ml U250300010 -,-- 12 1 l U250300050 -,-- 1 5 l U250300200 -,-- 1 25 l U250302000 -,-- 1 200 l Pz. SAFETY, WELDING AND CHEMICAL